SR30

SR30HM4 Japan (2017)
PRESTIGE LIMITED

Body wood: "heartwood" Maple top / Mahogany / "heartwood" Maple back body

Neck wood: Atlas-4 HP 5pc Wenge/Bubinga neck w/KTS™ TITANIUM rods

Board: Wenge

Headstock: matching

Inlays: mother of pearl & abalone oval with dots at 12th and 24th frets

Bridge: Mono-rail V 19mm spacing

Hardware: gold

Pickups: Bartolini® Custom

EQ: Ibanez Custom Electronics 3-band eq w / Eq bypass switch (passive tone control on treble pot) & Mid frequency switch

Controls: 2 large plastic knobs, 3 small plastic knobs, 2 switches: volume, balance, treble boost/cut, bass boost/cut, mid boost/cut, 3 way mid frequency selector (250hz, 450hz, 700hz), EQ bypass switch

Neck width: 38mm at nut, 60mm at 24th fret

Neck thickness: 19.5mm at 1st fret, 22.5mm at 12th fret

Radius: 305mm

Made in: Japan

Colors: natural low gloss NTL

Ibanez website

SR30QB4 Japan (2017)
PRESTIGE LIMITED

Body wood: Quilted Bubinga top / Mahogany / Quilted Bubinga back body

Neck wood: Atlas-4 HP 5pc Wenge/Bubinga neck w/KTS™ TITANIUM rods

Board: Wenge

Headstock: matching

Inlays: mother of pearl & abalone oval with dots at 12th and 24th frets

Bridge: Mono-rail V 19mm spacing

Hardware: gold

Pickups: Bartolini® Custom

EQ: Ibanez Custom Electronics 3-band eq w / Eq bypass switch (passive tone control on treble pot) & Mid frequency switch

Controls: 2 large plastic knobs, 3 small plastic knobs, 2 switches: volume, balance, treble boost/cut, bass boost/cut, mid boost/cut, 3 way mid frequency selector (250hz, 450hz, 700hz), EQ bypass switch

Neck width: 38mm at nut, 60mm at 24th fret

Neck thickness: 19.5mm at 1st fret, 22.5mm at 12th fret

Radius: 305mm

Made in: Japan

Colors: natural low gloss NTL

Ibanez website